Gallery
Bulldog Frame
Simply adds a serial number to the right hand side.
Barrel
Adds rifled barrel features to the visible front end.
Barrel Support
Just slightly taller as the original still rotated when the M5 bolt was tightened.
Hammer
This part was missing from the original file set.
Hammer Spring Guide Rod
If you want to see extra details through the transparent grips then this provides the hammer spring guide.
Hammer Spring Guide Stop
When used with the modified handle this a more realistic way to hold the spring guide.
Clip Holder
Version without the circular boss around one of the grub screws. I added a separate round feature so did not need the moulded in boss.
Left Cylinder Cover
Modified to enable the updated screwdriver sight to be screwed on rather than glued.
Screwdriver / Sight
Modified to provide screw holes to enable it to be screwed to the modified left cylinder cover rather than glued.
Handle
Modified to closer resemble original Bulldog mechanism for the hammer spring.
Outer Handle
Simply opened up the sizes of the M3 screw holes. The original was a little tight with some screw heads.
Rear Trigger
Added small bump to let the trigger lie in a slightly further back position.
Steyr Receiver
Added the two dimples around the safety switch. Just closer to the real Steyr part.
Slotted Screw
Provided as an alternative to the weaver scope knob fitted to the cylinder cover.
