Ultimate Hardware Kit For Snub Nosed Blade Runner Blasters

High quality blaster hardware kit for the Duplex Designs snub nosed version of Deckard's Blade Runner blaster.
Quality hardware with correct screws and heads, required springs and steel pins for handle and triggers.

Also includes a PCB, LEDs, switch and battery holder to greatly simplify the electronics assembly. Requires a soldering iron.


See also Electronics Only Kit

Only contains hardware, No STL files or resin parts!

Gallery

Mobirise Website Builder
Mobirise Website Builder
Mobirise Website Builder
Mobirise Website Builder
Mobirise Website Builder
Mobirise Website Builder
Mobirise Website Builder
Mobirise Website Builder
Mobirise Website Builder

Hardware Pack Contents

  • ❷ Micro Screws
  • ❶ M3 5mm Slot Pan Head
  • ❶ M3 5mm Cap Head
  • ❺ M3 8mm Cap Head
  • ❷ M3 10mm Cap Head
  • ❶ M3 12mm Cap Head
  • ❶ M3 20mm Cap Head
  • ❷ M3 8mm Machine Head
  • ❺ M3 12mm Machine Head
  • ❶ M3 20mm Machine Head
  • ❶ M3 30mm Machine Head
  • ❶ M5 25mm Machine Head
  • ❶ M3 4mm Grub Screw Slot Head
  • ❷ M4 4mm Grub Screw Slot Head
  • ❸ 3mmØ 14mm Steel Pin
  • ❷ 1.5mmØ 14mm Steel Pin
  • ❸ 4mmØ 10mm Spring (Triggers & cylinder)
  • ❶ 6mmØ 40mm Spring (Hammer)
  • ❹ 5mm 3mm Neodymium Magnets
  • ❶ Custom PCB
  • ❷ 3mm Red LED
  • ❷ 3mm Green LED
  • ❸ 160R Leaded Resistors
  • ❶ CR2032 Battery Holder
  • ❶ DPDT Slide Switch
  • ❶ CR2032 Battery
  • ❶ White Figure '8' 2 Core Wire
  • ❶ Red Flexible 26AWG Wire
  • ❶ Black Flexible 26AWG Wire
  • ❶ Red Single Core 30AWG Wire
  • ❶ Black Single Core 30AWG Wire
  • ❶ Heat Shrink Tubing


More Information

Some holes may need to be drilled prior to tapping to accept the screws. Recommended holes sizes are stated in the Assembly Guide. 

The electronics includes resistors, switch, LEDs, wires and battery holder.
A soldering iron will be required to assemble the simple PCB and attach wires to LEDs and battery holder etc.
Step by step instructions are included in the Assembly Guide.

Requires Purchase
Physical Part

© Copyright 2023 - 2024 Duplex Designs - All Rights Reserved
Email: support@duplexdesigns.co.uk